What are the starting steps of screw air compressor?
Answer: before starting the air compressor, first check according to the inspection items before starting, and then start it after there is no abnormality;
(1) Press the "start" button. After starting, the "start" indicator light should be on and the unit starts to run.
(2) After about 2S, the unit automatically loads, the inlet valve opens, and the lubricating oil pressure gauge and exhaust pressure pointer rise.
(3) After starting the loading, check whether the oil level is within the normal range.
(4) Whether there is air leakage, oil leakage or water leakage at each connecting part, and the number of starts shall not exceed 3 times within 1h.
(5) Put the air compressor into joint control.